- Stock: 5
- Brand: Nakashima Propeller
- Model: NPC 16R10 NI3A
- Weight: 5.40kg
- Dimensions: 44.00cm x 44.00cm x 15.00cm
Nakashima Type A Series
16 inch diameter, 10 inch pitch, 3 blade propeller.
Machined with 1" standard taper bore, and 1/4" keyway to fit 1" diameter prop shafts.
Manufactured in high strength, corrosion resistant NiBrAl material.
The increased strength allows for thinner blades which increases the propeller performance.
The Type A propellers have 0.43 blade area ratio, suitable for sailing yachts
If your specifications are not available in the options, or you have any special requirements, please let us know by using the "Ask a Question" tab before you order.
In most cases, inboard propellers are not returnable due to the fact that they are custom machined for your specific vessel.
It is very important to make sure the dimensions are correct before you order.
| Dimensions | |
| Diameter | 16 Inches |
| Pitch | 10 inches |
| Rotation | Right Hand |
| No. of Blades | 3 |
| Material | |
| NiBrAl | High strength Nickel Aluminum Bronze. More corrosion resistant than standard manganese bronze. |
| Bore | |
| SAE standard taper | 1" bore, with 1/4" keyway |
| Blade Area Ratio | |
| BAR | Blade area ratio 0.43 |