Johnson/Evinrude 13 1/4 x 17 BSPro
- Stock: 10
- Brand: Baeksan Propeller Co. Ltd.
- Model: BIM-JE070170
- Weight: 2.40kg
- Dimensions: 35.00cm x 35.00cm x 18.00cm
Product Views: 12124
$201.51CAD
Size: 13 1/4" X 17"
Three blade aluminum propeller.
Thru hub exhaust, for large tube gearcase.
Pressed in rubber bushing with 13 tooth spline.
To fit the following Johnson and Evinrude engines:
| E-Tec | 4 Stroke |
| 40 hp (2004 & newer) | 60 hp (1998 & newer) |
| 50 hp (2004 & newer) | 70 hp (1998 & newer) |
| 60 hp (2004 & newer) | 90 hp (2003 & newer) |
| 75 hp (2004 & newer) | 115 hp (2003 & newer) |
| 90 hp (2004 & newer) | 140 hp (2003 & newer) |
| 115 hp (2004 & newer) | |
| 130 hp (2004 & newer) | |
| Others | |
| 45 hp 2 cylinder (1986 & newer) | 75 hp 3 cylinder (1975 - 1984) |
| 50 hp commercial (1977 - 1979) | 85 hp (1969 - 1980 & 1991 - 1995) |
| 50 hp 2 cylinder (1971 - 1974) | 88 hp (1981 - 1996) |
| 50 hp 3 cylinder ( 1994 & newer) | 90 hp (1981 & newer) |
| 55 hp commercial (1980 & newer) | 100 hp (1979 - 1980 & 1988 - 1993) |
| 55 hp 3 cylinder (1968 - 1969) | 110 hp (1986 - 1989) |
| 60 hp commercial (1970 - 1971) | 112 hp (1994 - 1996) |
| 60 hp commercial (1984 & newer) | 120 hp (1986 - 1994) |
| 65 hp commercial (1984 & newer) | 125 hp (1971 - 1972) |
| 65 hp 3 cylinder (1972 - 1973) | 135 hp (1973 - 1976) |
| 70 hp 3 cylinder (1974 & newer) | 140 hp (1977 - 1994) |
| Also fits the following OMC stern drives: | |
|---|---|
| Model 400: | Model Cobra: |
| 2.3L 120 hp (thru 1991) | 2.3L 128 hp (1988 - 1991) |
| 2.5L 120 hp (1978 - 1981) | 2.5L 120 hp (1985 - 1987) |
| 3.0L 140 hp (thru 1989) | 3.0L 140 hp (1985 - 1987) |
Propeller comes with 1 year warranty against manufacture defects.
| Dimensions | |
| Diameter | 13 1/4 inches |
| Pitch | 17 inches |
| Rotation | Right hand |
| No. of Blades | 3 |
| Material | |
| Aluminum | Proprietary grade of cast aluminum, which is more malleable than other propellers. This means the propeller is more likely to bend than break from an impact. |
| Finish | |
| Powder Coat | High gloss black |
| Bore | |
| Rubber Drive Hub | Pressed in rubber drive hub with silicone bronze spindle. 13 tooth spline. Always use a new cotter pin, and always apply grease to the propeller shaft. |